Month: November 2013

Stonework At Streamside : Update

Posted on by qualifiedstonemason

TIMBER FRAME

Timber frame 1

Timber Frame 2

Back in September we mentioned that we were setting out the base for a new extension to a barn conversion in Cornwall. Well…..now that the timber frame is complete and the rag slate roof on, this week we returned to Streamside to start cladding the external walls in natural stone. This is the second phase for this project as we carried out the conversion to this barn a few years ago.

Rag Slate 2

Rag Slate 1

In total there will be approximately 140 square metres of stonework to be carried out for this project. Whilst we were setting out all the blockwork for the base a few weeks ago another task we had to carry out before the timber frame could be erected was to demolish the existing flight of stone steps leading into the barn and completely rebuild a new set of steps to suit the new design. For this we used about ten tons of reclaimed granite and the first few steps were formed on a radius.

Granite Steps

Radius Steps

We’ll keep posting further updates as this project proceeds.

another_job_by_mark_robinson

Carved In Stone

Posted on by qualifiedstonemason

AN OLD GRINDING WHEEL.

The Lodge

Here’s an old grinding wheel that was once used for sharpening knives and tools. It was recovered from a stream which runs through the old manor complex of Keynedon Barton in South Devon where it had been lying there for more than 60 years. ‘The Lodge’ is situated within the grounds of this manor complex and we have just completed a new retaining wall in front of it, all built in natural stone. It was decided that the old grinding wheel would have the name ‘The Lodge’ carved into it and then set into the new wall as a feature.

Click here to see the finished article.

another_job_by_mark_robinson